The plastic flow sensor is produced by POM
matrail, achieving the FDA standard, no bad smell, could
used for high temperature liquid, widely used in RO water
instrument, dispenser water, water heating systerm, wine
flow measure, drinking water systerm, to calculate the flow
rate.
Specification:
1. POM Material, accord with FDA Standard
2. Pipe Size: G1/2, G3/4, G1"
3. Flow Range: 0.5L/mim ~ 6.0 L/min ~ 10L/min ~ 50L/min
4. Deviation: 3.0%FS or +/-0.2L/min
5. Voltage: DC5V ~ DC12V
6. Voltage for High Level of Pulse Output: 200~400mV
(Iout=20mA)
7. Current for Low Level of Pulse Output: 0.1uA~10uA
(Vout=24V)
8. Max Pressure: 7.0bar
9. Work temperature: -20C ~ 105C
10. Size: 63.5*28*38mm for G1/2; 64*36*44mm for G3/4"
11. Hall Component, made in Japan
A. YITE TECHNOLOGY GROUP
